yantao90 发表于 2017-10-19 20:08

直接声振耦合计算报错

麻烦论坛上的朋友给看下，在直接声振耦合时弹出一下错误提示：

SOLVE PARALLEL OPTIONS
------------------------------------------------------------------------
    Multi Process - Frequency Level Parallel
    Total Number of Processes          :    4
    Number of Threads per Process      :    2
    Total Number of Threads            :    8
------------------------------------------------------------------------
LAUNCHING COUPLED FEM-FEM (Physical Coords - Freq) ANALYSIS

Number of coupled load cases =   1
Checking MESH Connectivity...
CPU Stats --- Delta:0:00:32 (   31.98)Total:0:00:32 (   31.98)

Building FLUID / STRUCTURE interface

Using Model      1 as STRUCTURAL Model
Using Model      2 as FLUID Model
There are31941 interface node(s) on the FEM FLUID side
There are35322 interface node(s) on the FEM STRUCTURE side
Generating INTERFACE mesh
Build Acoustic Interface Elements
Build Structural Interface Elements
Structural INTERFACE MESH contains      12000 elements
Fluid INTERFACE MESH contains       8800 elements
Generating INTERFACE mesh
Build Acoustic Interface Elements
Build Structural Interface Elements
Structural INTERFACE MESH contains      22880 elements
Fluid INTERFACE MESH contains      22880 elements
CPU Stats --- Delta:0:00:01 (      1.41)Total:0:00:33 (   33.39)
ERROR *** END OF FILE: ONLY       0 OVER   34880 ELEMENTS ARE READ FROM u60 FILE
**** ERROR has occurred during computation ****
You may try to compute the solution in manual mode and try to attach the results afterwards.
Aborting Coupled Direct Responseprocedure due to error...                  



麻烦给指导下类似的问题要怎么入手处理·，谢谢

lengxuef 发表于 2017-10-21 10:29

这个从日志看不出来，得检查VL模型。

小样儿pP2012 发表于 2017-10-29 18:58

楼主，你的问题解决了么？？？？怎么解决的？？我也碰到了这样的报错，也是这样提示：ERROR *** END OF FILE: ONLY      33 OVER   53ELEMENTS ARE READ FROM u60 FILE
**** ERROR has occurred during computation ****
You may try to compute the solution in manual mode and try to attach the results afterwards.
Aborting Coupled Direct Responseprocedure due to error...                  

yantao90 发表于 2017-12-4 16:21

lengxuef 发表于 2017-10-21 10:29
这个从日志看不出来，得检查VL模型。

好的，谢谢

yantao90 发表于 2017-12-4 16:22

小样儿pP2012 发表于 2017-10-29 18:58
楼主，你的问题解决了么？？？？怎么解决的？？我也碰到了这样的报错，也是这样提示：ERROR *** END OF FIL ...

也是检查了模型，模型处理的有些地方不合理

wpy123 发表于 2018-1-8 11:20

楼主，是模型不合适，还是网格有问题？

yantao90 发表于 2018-3-27 16:49

wpy123 发表于 2018-1-8 11:20
楼主，是模型不合适，还是网格有问题？

最后检查是网格有问题

GuoCL 发表于 2018-6-29 11:14

学习了，，
页: [1]
查看完整版本: 直接声振耦合计算报错