VL 11SL2.Job execution failed
新人第一次用，完全按照詹福良老师的那本声学仿真计算从入门到精通，做的书上的2.7节耦合案例，网格文件也是随书光盘上的，但是会报错Job execution failedPlease check job parameters and check that Service Manager is running。有没有大佬能帮着解答一下 本帖最后由 lsjlvy 于 2020-1-27 15:01 编辑刚遇到相同问题，后面是fail to start sysnoise process. 其他例子都没有问题。按照论坛其他帖子，重启，关闭防火墙，改变内存分配比例，调整parallerism type 等都没有用。
具体如下：
ERROR : GRAPH FILE lj-211747-Structure_samcef.u60DOES NOT EXIST !
**** ERROR has occurred during computation ****
You may try to compute the solution in manual mode and try to attach the results afterwards.
!!! Please check the *_samcef.log or *_samcef_dy.res file for errors !!!
Aborting Coupled Direct Responseprocedure due to error...
>> ERROR :Aborting Coupled Direct Responseprocedure due to error...
**** ERROR has occurred during computation ****
You may try to compute the solution in manual mode and try to attach the results afterwards.
A FATAL ERROR OCCURRED.PROGRAM STOPPED
**** ERROR has occurred during computation ****
You may try to compute the solution in manual mode and try to attach the results afterwards.
打开 _samcef.log 提示如下
Read ERROR on binary file or file not found
File >lj-211747-Structure_samcef.sam<
不知道哪里出了问题。请有经验的大侠指点。
我也是在结构模态计算时出现这个错误，具体内容如下，不知道问题出现在哪里，已经重新安装，装的时候也关闭了杀毒软件，系统也是win10,64位，安装版本是VL11-SL2
XPR VERSION 11-SL2
Requested task is SYSNOISE sequential computation.
Working directory on server is C:\Users\yanlijun\AppData\Local\Temp
Checking that the SYSNOISE launch script (C:\Program Files\LMS\LMS Virtual.Lab 11-SL2\VirtualLab\Sysnoise\5.6\bin\sysnoise_nogui.bat) exists on server...
OK
SYSNOISE log file on server is C:\Users\yanlijun\AppData\Local\Temp\yanlijun-60964-sysnoise.log.
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxJOB EXECUTION START
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
System for Computational Vibro-Acoustics
------------------------------------------------------------------------
SYSNOISE Rev 5.6Windows_x86_64MAR2003 DATE: 30-JAN-2020 22:51:35
PATCH LEVELO(Build Date: 18-FEB-2013)
READING THE SET-UP FILE: C:\Program Files\LMS\LMS Virtual.Lab 11-SL2\VirtualLab\Sysnoise\5.6\bin\\..\res\SYSNOISE.STP
THE SYSNOISE PROFILE FILE NAME HAS NOT BEEN DEFINED.
STANDARD GRAPHIC DEVICE SET TO DEFAULT
PLOTTING GRAPHIC DEVICE SET TO SCREENDUMP
MEMORY IN USE = 800000
AVAILABLE MEMORY= 486000000
FREE MEMORY = 485200000
CREATING DEFAULT SYSNOISE MODEL FILE default.sdb
SYSNOISE ANALYSIS OPTION :
BEM INDIRECT VARIATIONAL UNBAFFLED FREQUENCY FLUID
SYSNOISE>SCL> ENVIRONMENT SECTION SETUP USRDIR 'C:\Users\yanlijun\AppData\Local\Temp\' RETURN
SYSNOISE>SCL> ENVIRONMENT SECTION SETUP TMPDIR 'C:\Users\yanlijun\AppData\Local\Temp\' RETURN
SYSNOISE>SCL> Open Model 1 File yanlijun-60964-Structure.sdb Original Return
OPENING SYSNOISE MODEL FILE yanlijun-60964-Structure.sdb
LOADING MODEL Exported VLModel
WARNING:There are 49290 3-Dimensional Elements
SYSNOISE>SCL> Environment Section SETUP GEO_TOLERANCE '1E-006' Return
SYSNOISE>SCL> Return Environment Section SETUP BELL 'on' Return
SYSNOISE>SCL> Environment Section SETUP STABLEFEM TRUE Return
SYSNOISE>SCL> Modes
EIGENMODES>SCL> Vector 25 Tolerance 1.000000e-006 Iteration 100
EIGENMODES>SCL> BLanczos
EIGENMODES>SCL> Return
EIGEN MODES COMPUTATION
------------------------------------------------------------------------
COMPUTING THE 25 FIRST EIGENVALUES BY BLANCZOS METHOD
Shift value.......................0.0000 Hz
Maximum number of iterations...... 100
Number of iter. vect. (subspace).. 33
Tolerance for eigenvalues......... 1.00000E-06
STURM control (subspace method)
CPU Stats --- Delta:0:00:00 ( 0.40)Total:0:00:00 ( 0.40)
Running Bacon and Dynam ...
CPU Stats --- Delta:0:00:02 ( 2.34)Total:0:00:03 ( 2.74)
ERROR : GRAPH FILE yanlijun-60964-Structure_samcef.u60DOES NOT EXIST !
**** ERROR has occurred during computation ****
You may try to compute the solution in manual mode and try to attach the results afterwards.
!!! Please check the *_samcef.log or *_samcef_dy.res file for errors !!!
***ERROR*** CANNOT PERFORM THIS ANALYSIS PROCEDURE
**** ERROR has occurred during computation ****
You may try to compute the solution in manual mode and try to attach the results afterwards.
SYSNOISE>SCL> Close Return
SAVING MODEL Exported VLModel
FILE NAME C:\Users\yanlijun\AppData\Local\Temp\yanlijun-60964-Structure.sdb
MEMORY IN USE = 800000
AVAILABLE MEMORY= 486000000
FREE MEMORY = 485200000
CREATING DEFAULT SYSNOISE MODEL FILE default.sdb
SYSNOISE>SCL> New Model 1 File yanlijun-60964-SignalFile.sdb Return
SYSNOISE>SCL> Save Return
SAVING MODEL yanlijun-60964-SignalFile
FILE NAME C:\Users\yanlijun\AppData\Local\Temp\_yanlijun-60964-SignalFile.sdb
SYSNOISE>SCL> Exit
SYSNOISE Rev 5.6Windows_x86_64MAR2003 DATE: 30-JAN-2020 22:51:37
CPU Stats --- Delta:0:00:00 ( 0.04)Total:0:00:03 ( 2.78)
lsjlvy 发表于 2020-1-27 14:50
刚遇到相同问题，后面是fail to start sysnoise process. 其他例子都没有问题。按照论坛其他帖子，重启，关 ...
您好，请问你的问题解决了吗？我也遇到这个问题了 yanli 发表于 2020-1-30 22:58
我也是在结构模态计算时出现这个错误，具体内容如下，不知道问题出现在哪里，已经重新安装，装的时候也关闭 ...
您好，请问你的问题解决了吗？ 大家这个问题都解决了吗
页:
[1]