simulink仿真出错
warning: The control input of the switch block 'chanzhen/Switch' is a boolean signal. Input 1 is passed to the output if control input is true (1), otherwise input 3 is passed to the output. The current threshold values are being ignored. Set the threshold values to 1 to eliminate this warning.
这个仿真总出现上面这个警告，说的是转换开关没有设置门限值，我觉得设置了啊，在图上能看到是5，我百思不得其解，大家帮忙看看问题出在哪，我自己也在想，想到了也和大家分享 switch的判断信号是布尔信号
页:
[1]