RO/E导入GAMBIT出现的问题
我用PRO/E建了一个锥阀的流场的模型。导入GAMBIT后，划分网格，老是失败。提示错误如下：
Tetrahedral meshing has failed for volume volume1.
thisis usually caused by problem in the fase meshes.Check the skewnesses ofyour face meshes and make sure the face mesh sizes are not too large inarea of small
gaps.
我试着将网格尺寸由1降到0.2，还是不行。
望各位高手指点一二，在此多谢了
回复：（yiy）请教各位前辈
网格局部过大，局部加密一下
页:
[1]